- USA DIESEL LHG - 6.7L FORD & CUMMINS
MODULE REPAIR & TUNING
- MODULE REPAIR & TUNING
- 6.0L FICM
- 6.0L ECM
- 7.3L IDM
- LLY & LB7 DURAMAX - FICM & ECM REPAIR
- INTERNATIONAL IDM/ECM
- MODULE REPAIR - ECM / PCM / GEM
- CUSTOM TUNING 6.0 & 7.3L FORD
- INSTRUMENT CLUSTER REPAIR
- OVERHEAD CONSOLE REPAIR SERVICE
- FUSE BOX / FUEL PUMP RELAY SERVICE
- MODULE REPAIR & TUNING
- MONITORS, TUNERS, DIAGNOSTIC TOOLS AND TUNES
PERFORMANCE, MECHANICAL AND APPEARANCE UPGRADES
- 6.7L FORD POWERSTROKE DISASTER PREVENTION KIT
- AFE POWER
- AIR CONDITIONING
- ARP BOLT KITS & FEL-PRO GASKETS
- BODY PARTS
- BD DIESEL
- COMP CAMS
- COLD AIR INTAKES & WATER METH INJECTION
- COOLING SYSTEM
- FLEECE PERFORMANCE ENGINEERING
- FUEL AND FUEL DELIVERY
- HEADLIGHTS & MIRRORS
- HOLDERS DIESEL
- HIGH PRESSURE OIL
- IPR RESEARCH
- KILL DEVIL DIESEL
- NO LIMIT DIESEL
- OIL FILTRATION & CAPS
- POWERSTROKE PRODUCTS
- REDHEAD STEERING GEARS
- RIFFRAFF DIESEL PERFORMANCE
- SUSPENSION, STEERING, & MOUNTS
- TONNEAU COVERS / TOOL BOXES
- WARREN DIESEL
- YUKON GEAR & AXLE
- POWERSTROKE PARTS
- CUMMINS PARTS
- DURAMAX DIESEL PARTS
- ALTERNATORS & ALTERNATOR WIRING & STARTERS
- FICM PARTS
- BATTERIES AND BATTERY CHARGERS
- ASHEVILLE ENGINE
- BRAKES, ROTORS, BRAKE CONTROLLERS
- TOOLS / LOANER TOOLS
- FLUID FILM
- DIESEL TRUCK / SHOP REPAIRS
- ENGINE UPGRADE PACKAGES
FAQ & TIPS
- FAQ & TIPS
- 2. GET A BETTER ALTERNATOR.
- 1. WATCH THOSE BATTERIES & GROUNDS!
- 3. UPGRADE YOUR ALTERNATOR WIRING.
- 4. GET GAUGES
- 5. BACKFLUSH THE OIL COOLER - LOSE THE FORD GOLD COOLANT.
- 6. INSTALL A COOLANT FILTER
- 7. MONITOR YOUR EGTS SPECIFICALLY
- 8. USE 10W30 SYNTHETIC
- 9. GET THE BLUE SPRING KIT AND SAVE YOUR INJECTORS
- 10. INSTALL A FUEL PRESSURE GAUGE.
- 11. GET SAFE WHEN TOWING.
- 12. GET A MORE FREE FLOWING EXHAUST.
- 13. EXERCISE THE VGT VANES IN YOUR TURBO.
- 14. INSTALL A BYPASS OIL FILTRATION KIT.
- 15. REMOVE AND CLEAN THE FUEL PUMP.
- 16. CLEAN THE OIL SIDE OF THE INJECTORS.
- 17. CLEAN THE FUEL SIDE OF THE INJECTORS.
- 18. CLEAN UP THE EGR VALVE.
- 19. CLEAN THE EXHAUST GAS BACKPRESSURE SENSOR AND THE TUBE THAT FEEDS IT TO PREVENT A NO-START
- 20. UPGRADE YOUR TURBO OIL DRAIN TUBE AND OIL SUPPLY LINES.
- 21. RE-ROUTE YOUR CRANKCASE VENTILATION (CCV) LINE.
- 22. UPGRADE YOUR TRANSMISSION
- FAQ & TIPS
- WHY CHOOSE US
- CONTACT US
We're well versed in International IDM and ECM module repairs. We restore faulty units at a fraction of the cost of buying a replacement and we do so using upgraded components at the board level that are superior to OE.
With regard to these International IDM/ECM combo units, as you evaluate the repair, it's critical to recognize the complexity of the systems. Essentially, there are 4 possible primary failure points.
1) IDM Logic
2) IDM Power
4) Software Corruption
Our Ultra Service ensures that all of the above potential failure points are evaluated, confirmed and/or repaired and restored to full functionality. It's absolutely the most effective and certain way to achieve a one-shot, hassle free repair.
For shops, techs and others who are well versed in system diagnostics and have been able to formally and specifically confirm what aspect of their system has failed, we do offer a couple of other less comprehensive repair options.
A word of caution: The less comprehensive options (PREMIUM and BASIC) DO NOT address all of the above referenced potential failure points. In the right situation and for someone with the right diagnostic information they can be a solid choice. We've had plenty of instances the less comprehensive services effectively resolved an issue. But.... we've also had a good number of people guessing at what their problem is and then wind up needing additional repair services and having additional down time. Just be careful in your service level selection. If someone chooses a BASIC or PREMIUM level repair option they're assuming the responsibility for doing so. In other words, if, upon completion of one of those repair efforts, someone finds that their system is still not functioning properly it's almost certain that it's the result of failing to select the correct service option and/or failing to properly diagnose the issue. Selecting anything other than the ULTRA service leaves potential failure points that have not been evaluated/repaired, and will make additional troubleshooting far more difficult. Obviously, if someone goes that route and problems remain we're willing to perform any additional repair services one may need but standard lead times and standard pricing terms will apply.
We back our work 100% and work hard to support our customers but the customer assumes full responsibility for any issues resulting from selecting a service level that doesn't get to the actual root of the problem.
Service Level Options
1) ULTRA SERVICE
Comprehensive IDM/ECM combo service ** send in ECM and IDM
Absent formal pre-diagnosis and confirmation of the issue on your end, we absolutely recommend this service. It's the only comprehensive service that essentially guarantees you'll end up with a fully functioning, solid performing IDM/ECM combo system.
Ultra Service Includes:
a) IDM - Fully refreshed case, logic board, power board repair and upgraded board level components
b) ECM - Comprehensive diagnostics, disassembly, inspection, repair and rebuild as needed.
c) SOFTWARE - IDM/ECM International proprietary software reflash pairing the IDM and ECM units and resolving any potential software corruption issues
2) PREMIUM SERVICE
IDM Only - Full Service ** send in ECM and IDM
This service will provide you with a fully refreshed (internally & externally) IDM unit using enhanced internal components.
This service DOES NOT INCLUDE any repair or diagnostic services on the ECM.
Premium Service Includes:
a) IDM - Fully refreshed: refreshed case, logic board and power board repair, upgraded board level components
b) SOFTWARE - Full IDM and ECM International proprietary software reflash pairing the IDM and ECM units and resolving any existing software corruption issues
3) BASIC SERVICE - IDM POWER BOARD ONLY ** Send in IDM only
This service is to resolve IDM power Board issues only. We will provide you with a refreshed and upgraded power board with upgraded components and a refreshed external case.
This service DOES NOT INCLUDE any repair or diagnostic services on the IDM logic board hardware or software. Since no work is performed on the ECM only send in the IDM module.
Basic Service Includes:
a) IDM POWER BOARD - Fully refreshed IDM case and power board repair using upgraded board level components
How to order?
a) Select your service level and enter you order in the purchase area below
a) print the intake form linked below and include it with your module
Intake Form - Print this form and include with your module
Once your unit arrives we'll get it to the repair division and move forward!
If you have any questions feel free to give us a call at 515-897-4459
See below for pricing
BASIC SERVICE - IDM Power Board Only INTERNATIONAL
PREMIUM SERVICE - Comprehensive IDM Only INTERNATIONAL
ULTRA SERVICE - Comprehensive IDM/ECM combo service INTERNATIONAL